German French Spain Portugal  

 

DEUTSCH FRANÇAIS ESPAÑOL PORTUGESE  
 
 

PRODUCTS, ORDERS and DOWNLOADS


 

LED CONTROLLERS


MCA2X16 - multifunction LED Controller

In package is included:

Documentation CD  

1 piece

 
 
Downloads for MCA2X16 LED controller

MCA2X16.PDF

 - Short overview of multifunctional LED display controller MCA2X16 (424 KB)

hardrefMCA2X16.PDF

 - Hardware Reference Manual and LED controller Description MCA2X16 (561 KB)

commands1.8.PDF

 - Command Set description Manual MCA2X16 PDF format (275 KB)

chargen2.5.PDF

 - Upload - Download Character Generator  Manual for MCA2X16 (1,13 MB)

cables_MCA.PDF

 - Schematic of cables for MCA2X16 and interface boards PDF format (353 KB)

INTERFACE BOARDS for MCA2X16


CB232 - Interface board   - RS232C standard board

CB232 interface board

Downloads for CB232 interface board:

RS232.SCHDOC

 - Source schematics of CB232 (41KB)

RS232.PCBDOC

 - PCB board layout of CB232 (65 KB)

CB232.PDF

 - Source schematics of CB232  and wiring (223 KB)

 
 
CB203 - Interface board   - TTL level standard board

CB203 interface board

Downloads for CB203 interface board:

CB203.SCHDOC

 - Source schematics of CB203 (23 KB)

CB203.PCBDOC

 - PCB board layout of CB203 (50 KB)

CB203.PDF

 - Source schematics of CB203  and wiring (61 KB)

 
 
CB485 - Interface board   - RS485 full duplex four wire board

Downloads for CB485 interface board:

CB485.SCHDOC

 - Source schematics of CB485 (46 KB)

CB485.PCBDOC

 - PCB board layout of CB485 (72 KB)

CB485.PDF

 - Source schematics of CB485 PDF (172 KB)

 
 
 

LED DISPLAY DRIVER BOARDS


 
DRA1 - LED Driver board  
DRA1driver board

    DRA1 - LED driver board takes ability to produce end product for very short time, simplicity of PCB boards routing and save space and flexibility of the end product. Often when indicator displays are very Small, is a difficult to route all components in one PCB board. Using of separate external LED driver board is good practice. Each LED driver board DRA1 can drive  up to 10 seven segment LED indicators, or 80 single diodes.  Note: Boards is shipped without Load resistors.  

 
Downloads for DRA1:

DRA1.SCHDOC  - Source Schematic of One Block of LED driver Buffer (55 KB)
DRA1.PCBDOC  - Source of PCB of one Block of LED driver Buffer (91 KB)
DRA1.PDF  - Schematics of One Block of LED driver Buffer  PDF format (347 KB)

DRA2 - LED Driver board
DRA2 driver board

DRA2is the same as DRA1 - LED driver board, but can drive directly 20 seven segment indicators, or 160 single diodes.DRA2 is manufactured without load resistors and J1 connector that can vary from specific design. For more detailed information, download documentation and source files.

Note: Boards is shipped without Load resistors.

 
Downloads for DRA2:

DRA2.SCHDOC - Source Schematic of Two Blocks of LED driver Buffer  (93 KB)
DRA2.PCBDOC - Source of PCB of Two Blocks of LED driver Buffer  (122 KB)
DRA2.PDF - Schematics of Two Blocks of LED driver Buffer  PDF format (311 KB)

LARGE AND TEST LED BOARDS


TB10DA56R - Test board - Red  

TB10DA56R test board

   

 

 

      TB10DA56X is the test board including 5 double common anode seven segment indicators (red or green, depending of the last character in Part No R-red or G-green) 0,56 inch high (14,22 mm). Also board include shift register 74HCT595, Darlington buffer ULN 2803, 8 Load resistors, Anode Connector (26 pin) and 2 Inp/Out (10pin) connectors.

    Refer to downloads for Source Schematic and PCB files.

TB10DA56G test board

TB10DA56G - Test board - Green  
 
 
Downloads for TB10DA56X

TB10DA56X.SCHDOC  - Source Schematic of Test Board TB10DA56X and LED driver (113 KB)
TB10DA56X.PCBDOC  - Source of PCB of Test Board TB10DA56X and LED driver (140 KB)
TB10DA56.PDF  - Source Schematic of Test Board TB10DA56X and LED driver PDF format (288 KB)

PS15A - Large Seven Segment  Active board - Red  

   

 

 

 

 

      PS15A and PS15P is the boards including 4  common anode Large seven segment indicators (red) each 1,5 inch digit high (38,1 mm). PS15A  is active board include shift register 74HCT595, Darlington buffer ULN 2803, 8 Load resistors, Anode Connector (26 pin) and 2 Inp/Out (10pin) connectors and Extension Connector. PS15P is a passive board that consists from Indicators, connectors and Indicator jumpers selectors only. One pair can drive up to 8 Indicators.

    Refer to downloads for Source Schematic and PCB files.

PS15P - Large Seven Segment Pasive board - Red  
 
 
Downloads for PS15A and PS15P

PS15P.SCHDOC  - Source Schematic for Passive Board PS15P (114 KB)
PS15P.PCBDOC  - Source of PCB of for Passive Board PS15P (109 KB)
PS15P.PDF  - Source Schematic for Passive Board PS15P PDF format (15 KB)
PS15A.SCHDOC   -Source Schematic for Active Board PS15A (133 KB)
PS15A.PCBDOC  - Source of PCB for Active Board PS15P  (133 KB)
PS15A.PDF  - Source Schematic for Active Board PS15A PDF format (18 KB)
 
PS23A - Large Seven Segment  Active board - Red  

   

 

 

 

 

      PS23A and PS23P is the boards including 4  common anode Large seven segment indicators (red) each 2,3 inch digit high (56,9 mm). PS23A  is active board include shift register 74HCT595, Darlington buffer ULN 2803, 8 Load resistors, Anode Connector (26 pin) and 2 Inp/Out (10pin) connectors and Extension connector. PS23P is a passive board that consists from Indicators, connectors and Indicator jumpers selectors only. One pair can drive up to 8 Indicators.

    Refer to downloads for Source Schematic and PCB files.

PS23P - Large Seven Segment Passive board - Red  
 
Downloads for PS23A and PS23P

PS23P.SCHDOC  - Source Schematic for Passive Board PS23P (114 KB)
PS23P.PCBDOC  - Source of PCB of for Passive Board PS23P (111 KB)
PS23P.PDF  - Source Schematic for Passive Board PS23P PDF format (15 KB)
PS23A.SCHDOC   -Source Schematic for Active Board PS23A (133 KB)
PS23A.PCBDOC  - Source of PCB for Active Board PS23P  (133 KB)
PS23A.PDF  - Source Schematic for Active Board PS23A PDF format (18 KB)
 
PS40A - Large Seven Segment  Active board - Red  

   

 

 

 

 

 

 

      PS40A and PS40P is the boards including 2 common anode Large seven segment indicators (red) each 4 inch digit high (101,2 mm). PS40A  is active board include shift register 74HCT595, Darlington buffer ULN 2803, 8 Load resistors, Anode Connector (26 pin) and 2 Inp/Out (10pin) connectors and Extension connector. PS40P is a passive board that consists from Indicators, connectors and Indicator jumpers selectors only. One Active board  can drive up to 4 Passive boards that is 10 Seven Segment Indicators.

    Refer to downloads for Source Schematic and PCB files.

PS40P - Large Seven Segment Passive board - Red  
 
Downloads for PS40A and PS40P

PS40P.SCHDOC  - Source Schematic for Passive Board PS40P (81 KB)
PS40P.PCBDOC  - Source of PCB of for Passive Board PS40P (94 KB)
PS40P.PDF  - Source Schematic for Passive Board PS40P PDF format (13 KB)
PS40A.SCHDOC   -Source Schematic for Active Board PS40A (117 KB)
PS40A.PCBDOC  - Source of PCB for Active Board PS40P  (124 KB)
PS40A.PDF  - Source Schematic for Active Board PS40A PDF format (17 KB)
 
PS10A - Large Seven Segment  Active board - Red  

   

 

      PS10A and PS10P is the boards including 1 common anode Large seven segment indicators (red) each 10 inch digit high (250,4 mm). PS10A  is active board include shift register 74HCT595, Darlington buffer ULN 2803, 8 Load resistors, Anode Connector (26 pin) and 2 Inp/Out (10pin) connectors and Extension connector. PS10P is a passive board that consists from single LED's 10mm , connectors and Indicator jumpers selectors only. One Active board  can drive up to 9 Passive boards that is 10 Seven Segment Indicators.

    Refer to downloads for Source Schematic and PCB files.

 

PS10P - Large Seven Segment Passive board - Red  
 
Downloads for PS10A and PS10P

PS10P.SCHDOC  - Source Schematic for Passive Board PS10P (207 KB)
PS10P.PCBDOC  - Source of PCB of for Passive Board PS10P (143 KB)
PS10P.PDF  - Source Schematic for Passive Board PS10P PDF format (16 KB)
PS10A.SCHDOC   -Source Schematic for Active Board PS10A (297 KB)
PS10A.PCBDOC  - Source of PCB for Active Board PS10P  (203 KB)
PS10A.PDF  - Source Schematic for Active Board PS10A PDF format (22 KB)
 
PD20  - Large  5 X 8 Dot matrix board - Red  

   

      PD20 is the boards including 4 common anode Large dot matrix indicators ( 5 X 7red) each 2 inch digit high (53,4 mm). Also have extra row with single LED's to provide 5 X 8 matrix. PD20 dot matrix board include shift register TPIC6B595, Load resistors, Anode Connector (26 pin) and 2 Inp/Out (10pin) connectors.

    Refer to downloads for Source Schematic and PCB files.

   
 
Downloads for PD20 LARGE DOT MATRIX BOARD

5X8.SCHDOC  - Source Schematic for  Board PD20 (211 KB)
5X8.PCBDOC  - Source of PCB for  Board PD20 (183 KB)
5X8.PDF  - Source Schematic for Board PD20 PDF format (21 KB)
 

ACCESSORIES AND SERVICES


DESCRIPTION PART No LENGTH    
         
Standard 3 wire Serial cable RS232C with two  Cannon DB9 female connectors   RS232RC 3 m.    
Standard 3 wire Serial cable RS232C with two  Cannon DB9 female connectors   RS232RD 6 m.    
26 way ribbon Anode cable with 2 socket 26 way  connectors   26AN05 0.5 m.    
26 way ribbon Anode cable with 3 socket 26 way  connectors   26AN1 1.5 m.    
10 way ribbon Shift register cable with 2 socket  10  way connectors   10SRC 0.5 m.    
10 way ribbon Shift register cable with 2 socket  10  way connectors   10SRD 1 m.    
Photo detector with cable   PHLU 0.5 m.    
Tracing PCB Boards   - -    
Manufacturing custom PCB Boards   - -  
Assembling and Testing Custom PCB Boards   - -  

 
 

APPLICATIONS USING VARIOUS TYPES OF INDICATORS:

 
Manual for external LED drivers:
extbuf3.8.PDF  - External buffering and hardware examples with variety tripe of indicators, using serial shift registers 74HCT595 and TPIC6B595 and LED drivers  (691 KB)
Seven Segment Indicators:
2X7active.SCHDOC  - Source Schematic with two active large size 7 segment indicators and LED driver (84 KB)
2X7active.PCBDOC  - Source PCB board with two active large size 7 segment indicators and LED driver (99 KB)
2X7active.PDF  - Sample with two active large size 7 segment indicators (221 KB)
2X7pasive.SCHDOC  - Source Schematic with two passive large size 7 segment indicators (29 KB)
2X7pasive.PCBDOC  - Source PCB board with two passive large size 7 segment indicators (63 KB)
2X7passive.PDF  - Sample with two passive large size 7 segment indicators (147 KB)
14 Segment Indicators:
14segment.SCHDOC  - Source Schematic of 10 pieces 14 segment alphanumeric indicators and LED drivers (182 KB)
14segment.PDF  - Sample of 10 pieces 14 segment alphanumeric indicators (384 KB)
16 Segment Indicators:
16active.SCHDOC  - Schematic of active Test Board with 5 pieces 16 segment indicators and LED drivers (185 KB)
16active.PCBDOC  - Source PCB board of active Test Board with 5 pieces 16 segment indicators (175 KB)
16active.PDF  - Source Schematic of act. Test Board with 5 pieces 16 segment indicators PDF (338 KB)
16passive.SCHDOC  - Source Schematic of passive Test Board with 5 pieces 16 segment indicators (82 KB)
16passive.PCBDOC  - Source PCB board of passive Test Board with 5 pieces 16 segment indicators (93 KB)
16passive.PDF  - Source Schematic of pasive Test Board with 5 pieces 16 segment indicators PDF (198 KB)
Dot matrix Indicators:
5X8two.SCHDOC  - Source Schematic with two 5X8 large size dot matrix indicators and LED driver (109 KB)
5X8two.PCBDOC  - Source PCB board of two 5X8 large size dot matrix indicators and LED driver (300 KB)
5X8two.PDF  - Source Schematic with two 5X8 large size dot matrix indicators and LED driver PDF (189 KB)
5X8four.SCHDOC  - Source Schematic with four 5X8 large size dot matrix indicators and LED driver (178 KB)
5X8four.PCBDOC  - Source PCB board of four 5X8 large size dot matrix indicators (172 KB)
5X8four.PDF  - Source Schematic with four 5X8 large size dot matrix indicators PDF (333 KB)
Single LEDs schematics:
Single.SCHDOC  - Sample Source Schematic of 80 pieces single LEDs and LED driver (293 KB)
single.PDF  - Sample Source Schematic of 80 pieces single LEDs and LED driver PDF (304 KB)
LED bar schematics:
matrixbar.SCHDOC  - Sample Source Schematic of LED bar group and LED driver (213 KB)
matrixbar.PDF  - Sample Source Schematic of LED bar group and LED driver PDF (382 KB)
matrixbar1.SCHDOC  - Sample Source Schematic of LED bar group and LED driver (188 KB)
matrixbar1.PDF  - Sample Source Schematic of LED bar group and LED driver PDF (314 KB)
 
 

                                                                                        

 
 

   

 
 

     

 

 

MAIN CONTACT ABOUT US  

Copyright ©  ITS Displays LTD. All rights reserved.